Water Resistant Plywood

Ours is a renowned organization involved in the business of manufacturing, supplying and exporting premium quality Water Resistant Plywood. These plywoods are used for interior wood works or designing door panel inserts, dining table and many other accessories. All the plywoods offered by us are designed and developed at our well-equipped manufacturing unit employing modern techniques. In addition to this, the Water Resistant Plywood we offer is widely appreciated by our customers for their excellent attributes such as:
-
Water resistant
-
Fine finish
-
Seamless shine
-
Longer life
Water Resistant Plywood
Carbon is available in Moisture Resistant (MR) and Boiling Water Resistant (BWR)grades. Both the grades are used for the interior and exterior woodworking application. This ISI marked M.R. grade plywood is bonded with Melamine Urea Formaldehyde Synthetic Resin. While the BWR grade plywood is bonded with Fortified Phenol formaldehyde Synthetic Resin as per standards of IS:848:1974 under controlled temperature and pressure with adequate timings to obtain unmatched bonding.
Suggested Uses: Ceilings, door panel inserts, vehicle seats and backs, floor underlay, kitchen furniture, bedrooms, partitions, furniture like chair, study table, dining table, drawers, shelves, racks, cupboards, show cases, etc.
Test | ISI Requirement | Observed Value |
Moisture Content | 5% - 15% | 8% |
Dimension | Length+6mm, Width+3mm Thickness 6mm ,5% ,6mm- ,10% | Within limit |
Sp. Gravity | | >7 |
Resistance to Water (3 cycles of 8hr boiling & 16 Hr Drying at 65C )Adhesion to plies | Min. Pass Standard | Excellent |
Resistance ti Micro-organism Adhesion to plies | Min. Pass Standard | Excellent |
Static Bending Test | | |
a) Modulus of Elasticity - along the grain Avg - along the grain Avg | Min 5000N /sq.mm Min 2500N /sq.mm | 6500 N/sq.mm 6500 N/sq.mm |
b) Modulus of Rupture - along the grain Avg - along the grain Avg | Min 40N /sq.mm Min 20N /sq.mm | 560 N/sq.mm 30 N/sq.mm |